Home / Cleaning / How to Get Blood Out of Carpet?

How to Get Blood Out of Carpet?

In this article, we will discuss the best way to get blood out of carpet. Blood stains on the carpet can be extremely difficult to remove because the hemoglobin in the blood binds itself to the fibers present in the carpet. When it contacts oxygen it makes the bonding much stronger and the stain become stubborn. Now, this gives a clear view that it is a lot easier to clean the carpet when blood is still wet. It is easiest to remove blood when it is still wet.

Do not allow the blood to get dry, you should take proper measure to clean the carpet as soon as blood drop on it. Make sure you do not rub the stain instead try to blot throughout the process. Rubbing only encourage the stain to penetrate deep into the carpet, so you need to avoid rubbing the stain. Carefully follow all the instruction provided in the article to get blood out of a carpet.

How to Get Blood out of Carpet

Ways to Get Blood Out of Carpet:

1. Remove Blood Stain from Carpet with Detergent

  • A cleaning solution
  • Wool: one teaspoon mild, non-alkali detergent with one cup cold water
  • Oriental: One part white vinegar with one part cold water
  • Synthetics: Two tablespoons household ammonia with one cup cold water
  • Clean white towels
  • Spray bottle (for cleaning solution)

Ingredient for Rinsing:

  • 2-6 drops mild, non-alkali dish detergent with one cup cold water
  • Water bottle

Steps to Get Blood Out of Carpet:

Steps to Follow:

  • Your first step immediately after dropping blood is to blot as much as blood you can using a clean cotton cloth. It is highly recommended that you should not rub blood in any case else it becomes impossible to remove stain after that. Your main goal is to “lift” the stain and not rub it into the fibers so be careful.
  • Do not start blotting blood stain from the center as this will spread it on the carpet instead  start from the outside of the stain moving towards the center.
  • Now, spray the stain with cold water and blot to remove as much stain as possible. You should spray a little amount of cleaning solution on the stain. Or clean dry cotton cloth to blot the blood until no more stain shows on the carpet.
  • You may need to change your cloth several times so use a clean patch of the towel every time as you are blotting to make sure you are not spreading the stain. Repeat the process until the stain is no longer noticeable.
  • You can also spray with rinsing solution and then blot with a clean cloth to remove the stain. Try spray with clean water also and then blot with a clean cloth.
  • As always, repeat the process if it is necessary to be sure all the cleaning solution has been removed. Coat the stain with clean cloth or stack some paper towels and put heavy weight like heavy books, paper weight, dumbbells etc.)
  • Leave the paper towels to set for several hours as it will absorb any remaining liquid. After few hours, remove the weights and clothes and allow it to air dry. When stained region has dried completely, vacuum properly to restore carpet original texture and pick up any leftover cleaning solution residue.
  • There might be a chance that the spot turns brown when it dries. So, in that case, mix one part vinegar with two parts water. Then, directly apply the solution on the dried spot. Do not repeat this step more than once.

2. Clean Blood for Carpet with Ammonia

Ingredients you will Need:

  • Ammonia- A tablespoon
  • Water – Half cup

Steps to Remove Blood Stains from Carpet:

  • In a half cup of water, mix a tablespoon of ammonia.
  • Dip a cloth in the solution and dab it over the stubborn stain.
  • Dab it until the stain is removed completely.
  • At last dip a clean cloth in the fresh water and dab it over the area, once the stain is removed.
  • Note- Be  extra careful while working with ammonia since it could be harmful to your health.

3. Hydrogen Peroxide to Get Blood Out of Cotton and Carpet

Ingredients you will Need:

  • Hydrogen Peroxide
  • Paper Towels

Steps to Get Blood Out of Carpet:

  • Pour a few drops of hydrogen peroxide on the stain directly.
  • Place a few paper towels over the stain and a paper weight ( something heavy) on the paper towel.
  • The towel will absorb the stain and thus it will clean the carpet.
  • If the traces of stain are still visible clean it with a solution of vinegar and water.
  • Make sure, you do a patch test before using the hydrogen peroxide since it tends to discolor the carpet.

4. Salt to Remove Blood From Clothes and Carpet

Ingredients you will Need:

  • Salt
  • Water
  • A towel

Steps to Get Blood Out of Carpet:

  • Make a thin paste of water and salt.
  • Dip a towel into the solution, rub it over the stain.
  • Leave it on for a few minutes. By the time the towel will absorb the blood.
  • Blot the stain until the stain is removed completely.
  • Once the stain is removed completely remove the residue of the salt left.

Additional Tips and Ideas to Get Blood Out of Carpet:

  • There are some brilliant household items that can be used to remove blood stains easily: baking soda, salt, meat tenderizer, or hydrogen peroxide along with cold water.
  • Do not use warm water on the blood stain as it speeds up the setting process and the blood stain become more difficult to remove.
  • Do not use dishwasher detergents or laundry detergent as they may damage the fibers of your carpet.
  • Avoid using any type of spot cleaners on oriental rugs as it will certainly damage the fibers.
  • Do not use ammonia or bleach on wool carpets as it will damage the fibers.
  • Pour some salt on the stain and blot with the towel dampened with hydrogen peroxide. Then blot with a clean, damp towel.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

eXTReMe Tracker