Home / Workaround / How to Remove Window Tint?

How to Remove Window Tint?

In this article, we will discuss the best way to remove window tint. There are many reasons to have tint windows on vehicles, including protection from UV rays, cosmetic appeal, and a degree of privacy. It started to toll over time due to the elements and general wear and tear. The window tint damage can evident as bubbles or peeling along the edges. ¬†High temperatures, either hot or cold can initiate a separation of the window tint film from the window’s glass. Follow the article to know the best possible way to remove window tint.

How to Remove Window Tint

Top Methods to Remove Window Tint:

1.) Soap and Scrape to Remove Window Tint

Materials You Will Need to Remove Window Tint:

  • Dish soap
  • Razor blade or razor knife
  • Glass cleaner
  • Paper towels
  • Spray bottle
  • Water

Procedure:

Steps to Follow:

  • Use the knife to lift the corner. Using a razor blade lift a corner of the window tint film out of the window.
  • Firmly grasp the free corner and peel it off from the window. In case it does not peel off in a single piece then repeat the lifting process on the remaining film.
  • Prepare a mix of soapy water by using a mild detergent like dish soap and warm water. You are free to take any proportion that’s necessary.
  • Generously spray the soap solution onto the adhesive residue left behind where you have pealed the tinted film off.
  • Now, carefully scrape the adhesive from the window with a knife taking care not to cut you. As the water dries, simply spray to keep your working area moist.
  • Clean the window with a cleaner and paper towels after you have successfully removed all of the adhesives.

2.) Soap and Newspaper to Remove Window Tint

Materials You Will Need to Remove Window Tint:

  • Newspaper
  • Paper towels
  • Bucket or bowl
  • Dish soap
  • Glass cleaner
  • Razor blade or knife
  • Sponge
  • Water

Procedure:

Steps to Follow:

  • Prepare a mix of dish soap and warm water in a bowl or bucket. The soap solution will be concentrated little more that you would use for washing dishes.
  • Liberally apply the solution to your window with the damaged tint and cover it with a newspaper. Allow it to sit for one hour while soaking the outside of the newspaper with more soapy solution whenever it begins to dry.
  • Using your knife, peel the newspaper and the top layer of window tint in long strips
  • Scrub off the remaining layer of tint with the blade or knife in the same strip-like manner.

3.) Ammonia to Remove Window Tint

Materials You Will Need to Remove Window Tint:

  • Black plastic garbage bags
  • Dish soap
  • Spray bottle
  • Paper towels
  • Razor blade or knife
  • Scissors
  • Spray bottle of ammonia
  • Steel wool

Procedure:

Steps to Follow:

  • Prepare a blend of dish soap and warm water in a medium-sized spray bottle as you did in the previous method. Then, take a few of plastic garbage bag pieces to cover both the inside and outside of the affected window.
  • On the outside of the window, spray the soap solution and then apply a piece of plastic on top.
  • Inside of the window, you need to spray the ammonia liberally with the vehicle’s doors open for ventilation of the cleaner’s toxic fumes.
  • Let the plastic pieces sit in the sun for one hour. The black plastic has a tendency to trap the heat in to loosen the adhesive that clamps the tint in place.
  • Pry up a corner of the window tint with the fingernail, razor blade, or knife. Then, simply peel the tinted film off.
  • Clean any left-over adhesive off with ammonia and steel wool. After that, wipe any bits of debris away with paper towels.

4.) Hairdryer to Remove Window Tint

Materials You Will Need to Remove Window Tint:

  • Hairdryer
  • Paper towels
  • Cloth
  • Glass cleaner
  • Razor blade or knife

Procedure:

Steps to Follow:

  • With the hairdryer on high setting, hold it two or three inches away from one of the corners of the window tint to remove until you can pry it up with the razor blade.
  • Holding the hairdryer direct the air stream where the tint meets the glass. Then, gently continue to peel off the film.
  • Vigorously rub off the remaining adhesive with a clean towel. Then it will mop away more easily and stick to the towel.
  • Finally, clean the window with glass cleaner and paper towels.

Leave a Reply

Your email address will not be published. Required fields are marked *

*

eXTReMe Tracker